Neutrino-Induced Coherent π

MINERvA has measured the ν_{µ}-induced coherent π^{+} cross section simultaneously in hydrocarbon (CH), graphite (C), iron (Fe), and lead (Pb) targets using neutrinos from 2 to 20 GeV. The measurements exceed the predictions of the Rein-Sehgal and Berger-Sehgal PCAC based models at multi-GeV ν_{µ} energies and at produced π^{+} energies and angles, E_{π}>1 GeV and θ_{π}<10°. Measurements of the cross-section ratios of Fe and Pb relative to CH reveal the effective A scaling to increase from an approximate A^{1/3} scaling at few GeV to an A^{2/3} scaling for E_{ν}>10 GeV.

Simultaneous Measurement of Muon Neutrino ν_{µ} Charged-Current Single π

Neutrino-induced charged-current single π^{+} production in the Δ(1232) resonance region is of considerable interest to accelerator-based neutrino oscillation experiments. In this Letter, high statistic differential cross sections are reported for the semiexclusive reaction ν_{µ}A→µ^{-}π^{+}+ nucleon(s) on scintillator, carbon, water, iron, and lead targets recorded by MINERvA using a wideband ν_{µ} beam with ⟨E_{ν}⟩≈6 GeV. Suppression of the cross section at low Q^{2} and enhancement of low T_{π} are observed in both light and heavy nuclear targets compared with phenomenological models used in current neutrino interaction generators. The cross sections per nucleon for iron and lead compared with CH across the kinematic variables probed are 0.8 and 0.5 respectively, a scaling which is also not predicted by current generators.

Simultaneous Measurement of ν_{µ} Quasielasticlike Cross Sections on CH, C, H_{2}O, Fe, and Pb as a Function of Muon Kinematics at MINERvA.

This Letter presents the first simultaneous measurement of the quasielasticlike neutrino-nucleus cross sections on C, water, Fe, Pb, and scintillator (hydrocarbon or CH) as a function of longitudinal and transverse muon momentum. The ratio of cross sections per nucleon between Pb and CH is always above unity and has a characteristic shape as a function of transverse muon momentum that evolves slowly as a function of longitudinal muon momentum. The ratio is constant versus longitudinal momentum within uncertainties above a longitudinal momentum of 4.5 GeV/c. The cross section ratios to CH for C, water, and Fe remain roughly constant with increasing longitudinal momentum, and the ratios between water or C to CH do not have any significant deviation from unity. Both the overall cross section level and the shape for Pb and Fe as a function of transverse muon momentum are not reproduced by current neutrino event generators. These measurements provide a direct test of nuclear effects in quasielasticlike interactions, which are major contributors to long-baseline neutrino oscillation data samples.

Measurement of the axial vector form factor from antineutrino-proton scattering.

Scattering of high energy particles from nucleons probes their structure, as was done in the experiments that established the non-zero size of the proton using electron beams1. The use of charged leptons as scattering probes enables measuring the distribution of electric charges, which is encoded in the vector form factors of the nucleon2. Scattering weakly interacting neutrinos gives the opportunity to measure both vector and axial vector form factors of the nucleon, providing an additional, complementary probe of their structure. The nucleon transition axial form factor, FA, can be measured from neutrino scattering from free nucleons, νµn → µ-p and [Formula: see text], as a function of the negative four-momentum transfer squared (Q2). Up to now, FA(Q2) has been extracted from the bound nucleons in neutrino-deuterium scattering3-9, which requires uncertain nuclear corrections10. Here we report the first high-statistics measurement, to our knowledge, of the [Formula: see text] cross-section from the hydrogen atom, using the plastic scintillator target of the MINERvA11 experiment, extracting FA from free proton targets and measuring the nucleon axial charge radius, rA, to be 0.73 ± 0.17 fm. The antineutrino-hydrogen scattering presented here can access the axial form factor without the need for nuclear theory corrections, and enables direct comparisons with the increasingly precise lattice quantum chromodynamics computations12-15. Finally, the tools developed for this analysis and the result presented are substantial advancements in our capabilities to understand the nucleon structure in the weak sector, and also help the current and future neutrino oscillation experiments16-20 to better constrain neutrino interaction models.

Simultaneous Measurement of Proton and Lepton Kinematics in Quasielasticlike ν_{µ}-Hydrocarbon Interactions from 2 to 20 GeV.

Neutrino charged-current quasielastic-like scattering, a reaction category extensively used in neutrino oscillation measurements, probes nuclear effects that govern neutrino-nucleus interactions. This Letter reports the first measurement of the triple-differential cross section for ν_{µ} quasielastic-like reactions using the hydrocarbon medium of the MINERvA detector exposed to a wideband beam spanning 2≤E_{ν}≤20 GeV. The measurement maps the correlations among transverse and longitudinal muon momenta and summed proton kinetic energies, and compares them to predictions from a state-of-art simulation. Discrepancies are observed that likely reflect shortfalls with modeling of pion and nucleon intranuclear scattering and/or spectator nucleon ejection from struck nuclei. The separate determination of leptonic and hadronic variables can inform experimental approaches to neutrino-energy estimation.

High-Statistics Measurement of Neutrino Quasielasticlike Scattering at 6 GeV on a Hydrocarbon Target.

We measure neutrino charged-current quasielasticlike scattering on hydrocarbon at high statistics using the wideband Neutrinos at the Main Injector beam with neutrino energy peaked at 6 GeV. The double-differential cross section is reported in terms of muon longitudinal (p_{∥}) and transverse (p_{⊥}) momentum. Cross section contours versus lepton momentum components are approximately described by a conventional generator-based simulation, however, discrepancies are observed for transverse momenta above 0.5 GeV/c for longitudinal momentum ranges 3-5 and 9-20 GeV/c. The single differential cross section versus momentum transfer squared (dσ/dQ_{QE}^{2}) is measured over a four-decade range of Q^{2} that extends to 10 GeV^{2}. The cross section turnover and falloff in the Q^{2} range 0.3-10 GeV^{2} is not fully reproduced by generator predictions that rely on dipole form factors. Our measurement probes the axial-vector content of the hadronic current and complements the electromagnetic form factor data obtained using electron-nucleon elastic scattering. These results help oscillation experiments because they probe the importance of various correlations and final-state interaction effects within the nucleus, which have different effects on the visible energy in detectors.

Early Biomarkers from Conventional and Delayed-Contrast MRI to Predict the Response to Bevacizumab in Recurrent High-Grade Gliomas.

BACKGROUND AND PURPOSE: The interpretation of the radiologic response of bevacizumab-treated patients with recurrent high-grade gliomas represents a unique challenge. Delayed-contrast MR imaging was recently introduced for calculating treatment-response-assessment maps in patients with brain tumors, providing clear separation between active tumor and treatment effects. We studied the application of standard and delayed-contrast MR imaging for assessing and predicting the response to bevacizumab. MATERIALS AND METHODS: Twenty-four patients with recurrent high-grade gliomas were scanned before and during bevacizumab treatment by standard and delayed-contrast MR imaging. The mean change in lesion volumes of responders (overall survival, ≥1 year) and nonresponders (overall survival, <1 year) was studied. The lesion volumes at baseline and the changes in lesion volumes 1 month after treatment initiation, calculated from standard and delayed-contrast MRIs, were studied as possible predictors of outcome. In scans acquired at progression, the average change in lesion volume from previous follow-up in standard and delayed-contrast MRIs was compared. RESULTS: Response and progression patterns were identified from the mean change in lesion volumes, depicted from conventional T1WI, delayed contrast-enhanced MR imaging, and DSC MR imaging. Thresholds for early prediction of response were calculated by using these sequences. For each predictor, sensitivity, specificity, positive predictive values, and negative predictive values were calculated, reaching 85.7%, 87.5%, 75%, and 93.3% for conventional T1WI; 100%, 87.5%, 77.8%, and 100% for delayed-contrast MR imaging; and 75%, 78.6%, 50%, and 91.7% for DSC MR imaging. The benefit of delayed-contrast MR imaging in separating responders and nonresponders was further confirmed by using log-rank tests (conventional T1WI, P = .0022; delayed-contrast MR imaging, P < .0001; DSC MR imaging, P = .0232) and receiver operating characteristic analyses. At progression, the increase in lesion volumes in delayed-contrast MR imaging was 37.5% higher than the increase in conventional T1WI (P < .01); these findings suggest that progression may be depicted more effectively in treatment-response-assessment maps. CONCLUSIONS: The benefit of contrast-enhanced MR imaging for assessing and predicting the response to bevacizumab was demonstrated. The increased sensitivity of the treatment-response-assessment maps reflects their potential contribution to the management of bevacizumab-treated patients with recurrent high-grade glioma.

Convection-enhanced drug delivery of interleukin-4 Pseudomonas exotoxin (PRX321): increased distribution and magnetic resonance monitoring.

Convection-enhanced drug delivery (CED) enables achieving a drug concentration within brain tissue and brain tumors that is orders of magnitude higher than by systemic administration. Previous phase I/II clinical trials using intratumoral convection of interleukin-4 Pseudomonas exotoxin (PRX321) have demonstrated an acceptable safety and toxicity profile with promising signs of therapeutic activity. The present study was designed to assess the distribution efficiency and toxicity of this PRX321 using magnetic resonance imaging (MRI) and to test whether reformulation with increased viscosity could enhance drug distribution. Convection of low- [0.02% human serum albumin (HSA)] and high-viscosity (3% HSA) infusates mixed with gadolinium-diethylenetriamine pentaacetic acid and PRX321 were compared with low- and high-viscosity infusates without the drug, in normal rat brains. MRI was used for assessment of drug distribution and detection of early and late toxicity. Representative brain samples were subjected to histological examination. Distribution volumes calculated from the magnetic resonance images showed that the average distribution of 0.02% HSA was larger than that of 0.02% HSA with PRX321 by a factor of 1.98 (p < 0.02). CED of 3.0% HSA, with or without PRX321, tripled the volume of distribution compared with 0.02% HSA with PRX321 (p < 0.015). No drug-related toxicity was detected. These results suggest that the impeded convection of the PRX321 infusate used in previous clinical trials can be reversed by increasing infusate viscosity and lead to tripling of the volume of distribution. This effect was not associated with any detectable toxicity. A similar capability to reverse impeded convection was also demonstrated in a CED model using acetic acid. These results will be implemented in an upcoming phase IIb PRX321 CED trial with a high-viscosity infusate.

Structural analysis of oligomeric molecules formed from the reaction products of oleic acid ozonolysis.

The products arising from the ozonolysis of oleic acid (cis-9-octadecenoic acid) in solution have been studied using negative ion mode electrospray ionization ion trap mass spectrometry. Oleic acid is an important component of atmospheric organic aerosol and is a key model species in predicting aerosol physical and chemical characteristics. The four predicted reaction products, 1-nonanal, nonanoic acid, 9-oxononanoic acid, and azelaic acid, were all observed in roughly equal yields. In addition to these products a large number of higher molecular weight compounds were detected with m/z ratios of up to 1000 Daltons. Tandem mass spectrometry of these larger ions revealed thatthey represented a complex mixture of linear alpha-acyloxyalkyl hydroperoxides, secondary ozonides, and cyclic diperoxides, formed by reactions between ozonolysis products and Criegee intermediates. These comprise the first directly elucidated structures of large oligomeric species from oleic acid ozonolysis. The degree of oligomerization and hence molecular weight distribution was observed to increase with reaction time in solution.

Trabecular alveolar bone microarchitecture in the human mandible using high resolution magnetic resonance imaging.

OBJECTIVES: Cancellous bone microarchitecture in the mandible can influence the success of dental implant osseointegration. The aims of this study were to explore the feasibility of two-dimensional (2D) high resolution magnetic resonance imaging (MRI) for the evaluation of trabecular bone architecture and to compare architecture parameters derived from MR images between different areas in the mandible, and between sex and dental status. METHODS: 45 mandibular bone specimens (8 mm thickness) were cut from 15 fresh cadavers. MR images were obtained at 2 T using a multislice 2D spin-echo sequence. After MR image binarization, histomorphometry parameters, i.e. bone area fraction (BAF), specific perimeter (La), trabecular bone width (Tb.Wi), trabecular bone separation (Tb.Sp) and trabecular network anisotropy (R), were computed from the mean intercept length. The angle between trabeculae and tooth axis and the Euler-Poincaré characteristics (EPCs) were also computed. RESULTS: BAF, Tb.Wi and R were significantly higher in male specimens compared with female specimens, whereas Tb.Sp was significantly lower. The apparent Tb.Wi was found to be significantly higher in dentate specimens compared with edentulous ones. The highest anisotropy, corresponding to the smallest R value, was seen in the incisal specimens. The preferential orientation of the trabeculae was close to perpendicular to the tooth axis, especially in the molar specimens. CONCLUSION: BAF, La, Tb.Wi, Tb.Sp and R, the most variable parameters, may potentially have a relationship with the biomechanical competence of trabecular bone and play a role both in primary stabilization of dental implant and the time needed before loading.

pEmu: an improved promoter for gene expression in cereal cells.

A recombinant promoter, pEmu, has been constructed to give a high level of gene expression in monocots. It is based on a truncated maize Adh1 promoter, with multiple copies of the Anaerobic Responsive Element from the maize Adh1 gene and ocs-elements from the octopine synthase gene of Agrobacterium tumefaciens. The pEmu promoter was one of 12 different promoter constructs that were linked to the ß-glucuronidase (GUS) marker gene. Promoter activity was measured 48 h after introduction of the constructs into protoplasts of five different monocot species [wheat, maize, rice, einkorn (Triticum monococcum), and Lolium multiflorum] and one dicot (Nicotiana plumbaginifolia). In suspension cell protoplasts, the most highly expressing construct (pEmuGN) gave 10- to 50-fold higher expression than the CaMV 35S promoter in all the monocot species. The pEmu promoter should be valuable where a high level of gene expression is required in monocots. The pEmu promoter showed instability in several widely used Escherichia coli strains but was stable in a recA, recD strain AC001, which is described. Another construct, p4OCSΔ35SIGN, gave a tenfold increase in expression over the CaMV 35S promoter in dicot (Nicotiana plumbaginifolia) protoplasts.

GAL11P: a yeast mutation that potentiates the effect of weak GAL4-derived activators.

A mutant yeast in which a weak GAL4-derived activator functions as a strong activator bears a single mis-sense mutation in GAL11 (a.k.a. SPT13). The first 74 amino acids of GAL4, including the zinc-dependent DNA binding region, attached to an acidic activating sequence, are sufficient to respond both to GAL11 and to our mutant GAL11P (potentiator). PPR1, a yeast activator with a similar zinc finger sequence, also responds to GAL11 and to GAL11P, whereas regulators bearing unrelated DNA binding motifs do not. GAL11 itself works as a strong activator when tethered to DNA by fusion to the bacterial LexA protein, and deletion of GAL11 is known to cause a 5- to 10-fold reduction in GAL4 activity. We suggest that a complex of GAL4 and GAL11 constitutes a particularly strong activator; evidence that the putative GAL4-GAL11 complex ordinarily forms preferentially on DNA suggests a biological rationale for GAL11 action.

Synthesis and accumulation of pea plastocyanin in transgenic tobacco plants.

The pea plastocyanin gene in a 3.5 kbp Eco RI fragment of pea nuclear DNA was introduced into tobacco by Agrobacterium-mediated transformation. Regenerated plants contained pea plastocyanin located within the chloroplast thylakoid membrane system. Analysis of seedlings from a self-pollinated transgenic plant containing a single copy of the pea plastocyanin gene indicated that seedlings homozygous for the pea gene contained almost twice as much pea plastocyanin as seedlings hemizygous for the pea gene. Homozygous seedlings contained approximately equal amounts of pea and tobacco plastocyanins. The amount of tobacco plastocyanin in leaves of transgenic plants was unaffected by the expression of the pea plastocyanin gene. The mRNA from the pea gene in tobacco was indistinguishable by northern blotting and S1 nuclease protection from the mRNA found in pea. In both pea and transgenic tobacco, expression of the pea plastocyanin gene was induced by light in leaves but was suppressed in roots. Pea plastocyanin free of contaminating tobacco plastocyanin was purified from transgenic tobacco plants and shown to be indistinguishable from natural pea plastocyanin by N-terminal protein sequencing and 1H NMR spectroscopy.

Embryo yield in wheat anther culture is influenced by the choice of sugar in the culture medium.

The effect of employing different sugars in wheat anther culture has been investigated using four Spring wheat cultivars. The most responsive cultivar, Orofen, gave a three to four-fold increase in embryo yield when maltose was used in place of sucrose, with 50 embryos being produced for every 100 anthers cultured. Measurement of sugar concentrations in the culture media indicated that sucrose was more rapidly hydrolysed than maltose. However, neither the osmotic potential of the medium nor the concentration of glucose appeared to be critical factors in determining embryo yield.

Plastocyanin is encoded by a single-copy gene in the pea haploid genome.

cDNA clones for pea plastocyanin were isolated from a pea leaf cDNA library screened with a (32)P-labelled mixed oligonucleotide probe predicted from part of the N-terminal amino acid sequence of pea plastocyanin. The six cDNA clones isolated were found to be identical in the regions in which they overlapped. A Southern blot of restricted pea DNA probed with one of these cDNA clones showed the pea plastocyanin gene to exist as a single copy in the haploid genome. A pea genomic library in λEMBL3 screened with the same cDNA clone gave three positive plaques which contained identical 16 kbp Bam HI fragments. A single uninterrupted plastocyanin gene was located near the middle of the fragment and was characterised by DNA sequencing. The derived amino acid sequence indicates that the plastocyanin precursor consists of 168 amino acid residues including a presequence of 69 amino acid residues. The transcription initiation site was located by S1 nuclease mapping approximately 50 bp upstream of the translation initiation site. A sequence similar to a consensus light-responsive element found in a large number of phytochrome-dependent light-inducible genes is located just upstream of the TATA box. A cluster of direct repeats containing potential Z-DNA-forming elements occurs 600-750 bp upstream of the transcription initiation site.